The Principle Of Induction Cooker
Jun 05, 2022
The surface of the induction cooker is a heat-resistant ceramic plate. The alternating current passes through the coil under the ceramic plate to generate a magnetic field. When the magnetic field lines in the magnetic field pass through the bottom of the iron pot, stainless steel pot, etc., an eddy current is generated, which makes the bottom of the pot heat up quickly and achieves the effect of heating food. Purpose. The top of the cooktop is a high-strength, impact-resistant ceramic plate (crystal glass). The underside of the top is equipped with a high-frequency induction heating coil (ie, an excitation coil), a high-frequency power conversion device and a corresponding control system. A flat bottom is placed on the top of the top. cooking pot. Its working process is as follows: the alternating current is converted into direct current by the rectifier, and then the direct current is converted into high frequency alternating current exceeding the audio frequency through the high frequency power conversion device, and the high frequency alternating current is applied to the flat hollow spiral induction heating coil, which produces high frequency. Frequency alternating magnetic field, its magnetic force line penetrates the ceramic plate of the cooktop and acts on the metal pot. In the cooking pot, a strong eddy current is generated due to electromagnetic induction. When the eddy current flows against the internal resistance of the pot, the conversion of electrical energy to heat energy is completed, and the Joule heat generated is the heat source for cooking.
The material of the pot must be iron or alloy steel, and its high magnetic permeability can enhance the magnetic induction, thereby greatly enhancing the eddy electric field and eddy current thermal power. Cooking utensils made of other materials will cause abnormal load on the induction cooker and start automatic protection because the material resistivity is too large or too small, and cannot work normally. At the same time, because iron can fully absorb the magnetic field and has a very good shielding effect, it reduces a lot of magnetic radiation, so iron pans are safer than any other cooking utensils. In addition, iron is a necessary element that the human body needs to ingest for a long time, but the human body can only absorb divalent iron. The iron in the iron pot contains trivalent iron. However, the reducing vitamins in the body can convert trivalent iron into bivalent iron. Profitable absorption.







