Tips for constant temperature milk regulator for baby

Dec 29, 2023

Note: Most milk powder manufacturers require the use of 40℃ ~ 50℃ warm water to flush milk powder, in order to protect the nutritional value of formula milk powder will not be destroyed, the water temperature should be set in this temperature range.

After the mixture is ready, it should be left for about one minute to release the air bubbles created during the mixing process.

Before feeding, drop a little on the back of the hand to feel warm, milk temperature is suitable for feeding. In addition, the water temperature should be about 3-5℃ higher than the feeding temperature, because the bottle and milk powder will absorb some heat.

 

Due to the water in the milk mixer is warm for a long time, the bacteria in the water will multiply much faster than at room temperature, so the water stored in the milk mixer should not be more than half a day.

In order to extend the service life of the milk mixer, please pay attention to the following matters:

1. Keep out of reach of children;

2, The bottom of the milk mixer is prohibited from water;

3, Cleaning, please wipe with a soft cloth, such as the product base heating plate has a small amount of scale, please use household vinegar and water to clean, do not use organic solvents to clean;

4, The base heating plate will produce high temperature after work, do not touch with hands to avoid burns;

5, Before feeding, drop a few drops of milk on the arm to confirm the temperature of the milk.

You Might Also Like